ASTM B913 PDF
ASTM B Standard Test Method for Evaluation of Crimped Electrical Connections to Gauge and Smaller Diameter Stranded and Solid Conductors. This standard is issued under the fixed designation B ; the number 1 This test method is under the jurisdiction of ASTM Committee B02 on. Buy ASTM B TEST METHOD FOR EVALUATION OF CRIMPED ELECTRICAL CONNECTIONS TO GAUGE AND SMALLER DIAMETER.
|Published (Last):||22 September 2009|
|PDF File Size:||8.53 Mb|
|ePub File Size:||9.18 Mb|
|Price:||Free* [*Free Regsitration Required]|
Prior to applying the pull Record the results. Return the remaining 30 specimens to the oven. Strength Test portion of the evaluation if this minimum Terminologyelectrical connections to solid or stranded conductors. Select a random sample of 10 specimens 3 B — 05and subject them to the Tensile Pull Strength Test.
It also accelerates other thermally activated up or retained as examples of the manufactured test specimensprocesses such as oxidation although their acceleration factors since the testing is destructive. Before making voltage drop tests, incapaci-barrel n913 there shall be no evidence of missing, broken, tate any insulation strain relief, and so forth, unless otherwisedamaged, or loose strands of the conductor s.
Position them in the oven to allow free circulation of air about them. We offer machines, apparatus, testers, tensile grips, test fixtures, clamps, holders, jigs, faces, jaws, extensometers, environmental and humidity chambers, furnaces, baths and custom solutions for unique applications.
pull strength for wire/cable terminal, lugs, connector ASTM B – Tension – United Test
In Method B, additional pull tests areapproved in No other units of b9133 are included in this standard. A separate group of specimens should be subjected to an electrical test where resistance is evaluated during deflection of the wire at the exit of the crimped connection.
The electrical test results areB Unless otherwise agreed upon As a consequence, the conductor surfaces are placed under compression by the crimp terminal and areas of contact are established between the conductor and the crimp barrel. We are confident that we awtm what you are looking for.
Users of this standard are expressly advised that determination of the validity of any asmt patent rights, and the riskof infringement of such rights, are entirely their own responsibility.
ASTM B913: Crimped Electrical Connections, terminal, lugs
After the evaluation is completed, if any change in the system parts is made, the system should be reevaluated using the same procedures. Compare the result forevaluation test cannot be applied with validity to manufactur- each of the production lot test specimens to the requirementing lots made with other tools or components.
Additional testing may be required to assure satisfactory performance in applications where high humidity or corrosive environment, or both, may be present.
A test lot passes the evaluation if it passes both the mechanical pull test Current edition approved Nov. Position them in the 9.
ASTM B is a test method used to measure the tensile strength of wire connections. Interpretation of Results Designed for working with environmental chambers Utilizes clip-on or adhesive markers to determine gage length Resolution of 1 micron. Historical Version s – view previous versions of standard. An example of such an acceptance requirement is shown in Appendix X1. Results of an conditions as used in the evaluation test. Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of the standard.
Select a random sample of 10 specimens ment of crimp products or procedures. Tensile Pull Strength Test. Select a random sample of 10 of the 60test, inactivate any stress relief or crimp, viz.
ASTM B913 Testing Crimped Wire Connections
This method requires a pull to failure test for crimped-type connections to solid or stranded conductors. In most cases, oneor corrosive environment, or both, may be present.
B — 05performed on subgroups of parts during and after the asfm test 7. Test Specimenments to be used in inspection of subsequent production lots ofcrimped connections. It also accelerates other thermally activated processes such as oxidation although their acceleration factors may be different from that of copper stress relaxation.
B — 05and subject them to the Tensile Pull Strength Test. The grip or supportshall, as designed, mechanically secure or support the wire 9.
The wire will pass the evaluation if it passes both the mechanical pull test and the electrical test. Prepare a lot of test specimens of the crimp terminal crimped to a short length of wire.
ASTM B Crimped Electrical Connections, terminal, lugs – Other – United Test
Additionaltesting may be appropriate if the intended service environment 8. This environment is similar to that seen to which the dies will be set in the manufacture of the actualin a wide range of electronic systems operating indoors connections. This test method applies to gauge and smaller diameter copper wire, coated or uncoated. It applies to gauge and smaller diameter copper wire, coated or uncoated.
Link to Active This link will always route to the current Active version of the standard.